Broken filament feeder in Makibox

The broken Zen Drive wheel

My Makibox 3D printer was doing very well up to early this month. But then suddenly, it decided to stop pushing the plastic filament into the extruder. After some manual pushing, it worked again for a while, but then it'd stop yet again. Looking at the filament, I saw some grinding, so I initially suspected a clogged nozzle. But if I disengage the filament from the feeder and push the filament in by hand, the nozzle had no problem putting out the material. So I took the filament feeder apart.

Now, Makibox's filament feeder is called "Zen Drive". It consists of a stepping motor with toothed axis and a tension wheel. The teeth "bites into" the filament to make it move, while the wheel allows the filament to catch onto the teeth in a consistent manner. When I disassembled the Zen Drive assembly, I noticed that two of the wheel's spokes had snapped. Snapped spoke meant that a consistent pressure couldn't be applied to the filament. This was the cause of the inconsistent filament feed I experienced. It was time for a repair.

The broken (and glue-gunned) wheel, and its replacement in the Zen Drive assembly

I did some emergency fix with a glue gun to hold the spokes in place. Unfortunately, it didn't help all that much. I explained the Makibox customer support of the situation and I was promised a free replacement wheel in two weeks. It arrived on Monday, and I put it into the Zen Drive yesterday night to see if this solved the problem.

Zen Drive reassembled

The Zen Drive was fully reassembled, and was fed a pink-coloured filament this time. The black one that I had been using was okay, but as far as kids' toys go, it wasn't an ideal colour.

One pink kitty coming up

The little kitty statue was again used as a quick test to see if things were working out. When the wheel was broken, the printer couldn't print more than about three layers before the feeding stopped. Seeing that it was printing past that without issues, I was relieved.

The pink and black kitty

And after a bit of waiting, the printing was complete and a fully formed pink kitty was in my hands. My Makibox was back in working order again.
Defined tags for this entry: , , , ,

Trackbacks

Trackback specific URI for this entry

This link is not meant to be clicked. It contains the trackback URI for this entry. You can use this URI to send ping- & trackbacks from your own blog to this entry. To copy the link, right click and select "Copy Shortcut" in Internet Explorer or "Copy Link Location" in Mozilla.

No Trackbacks

Comments

Display comments as Linear | Threaded

No comments

Add Comment

E-Mail addresses will not be displayed and will only be used for E-Mail notifications.

To prevent automated Bots from commentspamming, please enter the string you see in the image below in the appropriate input box. Your comment will only be submitted if the strings match. Please ensure that your browser supports and accepts cookies, or your comment cannot be verified correctly.
CAPTCHA

Enclosing asterisks marks text as bold (*word*), underscore are made via _word_.
Standard emoticons like :-) and ;-) are converted to images.

Copyright (C) 1996-2024 Woo-Duk Chung (Wesley Woo-Duk Hwang-Chung). All rights reserved.